Matrix Aquos Ultra D Spare Tips 3,4 mm

Roll over image to zoom in Click on image to zoom

The Matrix Aquos Ultra D Spare Tips are carbon replacement tips for the Matrix Aquos Ultra D feeder rods. The 3.4 mm fitting is designed for this distance-focused rod series, which is intended for heavier feeders, longer casts and river fishing. At approximately 63 cm long, the tips are suitable as spares or for adapting bite detection to wind, current and feeder weight.

Choose a more sensitive tip when conditions allow and you want to see subtle bites clearly. A stiffer tip provides more control when current, crosswinds or a heavier feeder continuously put pressure on the tip. Always check the exact rod series and fitting diameter; the same diameter alone is not a complete guarantee of a correct fit.

Key features

Carbon replacement tip for Matrix Aquos Ultra D feeder rods
3.4 mm diameter fitting
Approximately 63 cm long
Developed for distance feeder fishing, heavier feeders and flowing water
Suitable as a spare or for adapted bite detection

Frequently asked questions

Are these tips suitable for Aquos Ultra X rods?
No. The Aquos Ultra D tips have a 3.4 mm fitting and are intended for the Ultra D series. The Ultra X series uses different tips.

When should I choose a stiffer feeder tip?
When current, wind or a heavy feeder bends a sensitive tip too far. Choose sufficient resistance to maintain a stable starting position without making bite detection unnecessarily stiff.

Can I cast a heavier feeder with a stiffer tip?
Only within the rod's maximum casting weight. A stiffer tip does not increase the permitted load of the rod blank.