Stora Bung & Extractor Kit – Elastic Cone with Bung Extractor

Preston Stora Bung & Extractor Kit – easily adjust elastic tension

The Preston Stora Bung & Extractor Kit is a compact solution for securing, storing and adjusting elastic in a pole top kit. The integrated winding section keeps excess elastic neatly in place, allowing you to quickly adjust the tension later without having to reassemble the entire top kit.

The ribbed, tapered base can be carefully shortened to fit the bung into the pole section. With the supplied bung key, you can easily reach the stopper and remove it from the top kit for maintenance or readjustment.

Key features

• Elastic cone with integrated holder for spare elastic
• Allows precise adjustment of elastic tension
• Ribbed base can be carefully trimmed to size
• Lightweight construction for minimal impact on pole balance
• Designed for easy fitting and removal
• Bung key included

Installation and use

Only shorten the cone when necessary, removing a small section at a time. The bung should fit securely in the chosen pole section while remaining accessible with the extractor. Wind the excess elastic evenly onto the holder and check the tension before closing the top kit. Use the variant selector to choose the version that matches the internal diameter of your top kit.

Frequently asked questions

What is the winding section of the bung for?

It stores an extra length of elastic. By winding elastic on or off, you can adjust the pre-tension and replace a worn end more easily later.

How do I remove the Stora Bung from the top kit?

Use the supplied bung key to reach the bung in a controlled manner and pull it out of the pole section. Therefore, do not fit the bung deeper than the extractor can safely reach.

How do I know which version I need?

Measure the internal diameter of the pole section where the bung will be fitted. Then use the variant selector to choose the correct version; the ribbed base is only intended for the final, precise fit.