Hexmesh Plastic Open End Feeders

The Preston Hexmesh Plastic Open End Feeders give a classic open-end feeder a modern, largely enclosed plastic design. Only carefully positioned Hexmesh openings allow water to reach the groundbait. This releases the contents more slowly and in a more controlled way than a fully open cage feeder, which is particularly useful in deeper or flowing water.

Controlled groundbait release

• Largely enclosed plastic body with precisely positioned Hexmesh openings
• Designed for slower, more controllable groundbait release
• Open ends make filling and plugging easy
• Suitable for both still and flowing water
• Particularly useful when groundbait needs to remain intact deeper in the water or in the current

How to fill the open-end feeder

First place a plug of groundbait at one end, fill the middle with groundbait or loose particles, and seal the other end again. The firmer and stickier your mix, the longer it will stay in the feeder on its way down. Test the release at the bank before you start feeding, especially in deeper water or noticeable flow.

When does this design come into its own?

This feeder is a logical choice when a fully open feeder loses the groundbait too quickly. The combination of enclosed sections and Hexmesh openings slows water intake without completely blocking release. This allows you to present groundbait more accurately close to the bottom.

Frequently asked questions

Why does the body have only a few Hexmesh openings?

The limited openings slow water intake and help release the groundbait in a controlled manner. This is particularly useful in deeper water and current.

Can I feed loose particles with this feeder?

Yes. Place the particles in the middle and seal both open ends with groundbait, so the contents stay in place better during casting and sinking.

How can I prevent the groundbait from staying in the feeder for too long?

Use a less sticky mix, press the sealing plugs less firmly, and check the release first in shallow water at the bank.