Rubber Stop Plummets 15g – Plummet (2 pcs)

The Colmic Rubber Stop Plummets are 15-gram plummets for accurately determining the water depth and the position of your rig. The high-density EVA insert holds the hook securely without damaging the point or hooklength, even with smaller hooks.

Thanks to the side slot, the nylon line can run through the soft material. This allows you to plumb both with the complete hooklength attached to the hook and from the last shot on the rig. The fully lacquered metal construction and thin, strong attachment eye are designed for repeated use, even when you need to cast further.

Key features

• 15-gram plummet
• High-density EVA insert protects the hook point and line
• Suitable for small hooks and fine hooklengths
• Side slot allows the nylon line to pass through safely
• Two practical ways to measure depth
• Lacquered metal housing for durable use
• Thin and strong attachment eye
• Two plummets per pack

Practical use

For an exact hook depth, carefully press the hook into the EVA insert and let the plummet rest on the bottom. If you want to check how much of the hooklength lies on the bottom, guide the line through the side slot and plumb from the last shot. Move the float in small steps until the desired presentation is achieved.

Frequently asked questions

Does the plummet damage the hook point?

The hook is placed in the dense EVA insert rather than hard metal. Secure it with controlled pressure and avoid unnecessary twisting when removing it.

What is the benefit of the side slot?

The hooklength can run alongside the plummet through the slot. This allows you to plumb from the last shot without rebuilding the complete rig.

When should I plumb with the hook and when with the last shot?

Plumbing at the hook shows where the hook itself sits in relation to the bottom. Plumbing from the last shot is useful when you want to determine how much hooklength rests on the bottom.

How many plummets are included in the pack?

The pack contains two 15-gram Rubber Stop Plummets.