Easy Strippa – PTFE Puller Bush

Colmic Easy Strippa – PTFE pulla bush for strippa kits

The Colmic Easy Strippa is a PTFE pulla bush for the side opening of a strippa kit. It is designed to allow the elastic to move smoothly and in a controlled manner through the carbon top kit, with as little friction and as few contact points as possible. This helps the elastic pull out of the kit and retract smoothly while playing a fish.

The slim profile and wear-resistant PTFE construction are designed for precise, durable fitting. A groove and wedge shape support secure fixing in the drilled hole. Before fitting, carefully check the size on the packaging and use the specified drill diameter to ensure the bush fits correctly in the top kit.

Key features

• PTFE pulla bush for strippa kits and pulla systems
• Smooth surface to minimise friction on the elastic
• Slim profile with as few contact points as possible
• Designed for smooth elastic passage
• Groove and wedge system for secure fitting in carbon
• Wear-resistant construction that retains its shape over time
• Specified drill diameter shown on the packaging

Frequently asked questions

How do I choose the right Easy Strippa for my top kit?
Match the bush to the required internal opening and the diameter of the hole that can safely be drilled in the carbon top kit. Refer to the sizing on the packaging and check the wall thickness of the kit before drilling.

Why is PTFE suitable for a pulla bush?
PTFE has a smooth, wear-resistant surface. This allows the elastic to move along the bush with minimal resistance, even when it is under tension while playing a fish.

What should I consider when fitting it?
Mark the position carefully, drill using the specified diameter and ensure there are no sharp edges that could damage the elastic. If in doubt, have it fitted by someone experienced in modifying carbon top kits.

Official product videos